What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From breweries and dairies to laboratories and manufacturing plants, these systems provide stable and controlled cooling using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a mixture of propylene or ethylene glycol combined with water. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then pumped through pipework to absorb heat from equipment or products before returning to the chiller.

How a Glycol Chiller System Works

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Compressor


• Heat rejection condenser


• Evaporator heat exchanger


• Expansion valve


• Glycol reservoir and pump


• Electrical control system

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Programmable temperature regulation


• PLC or microprocessor interfaces


• Pressure protection cut-outs


• Circulation pump management


• Alarm notifications


• BMS or remote access integration

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support preventative maintenance and compliance documentation.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Control Panel Installation Considerations

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical integration – Connections must align with UK wiring regulations and include suitable isolation and circuit protection.


• Location and ventilation – Panels should be located in dry, well-ventilated areas away from excessive heat, vibration or moisture.


• System validation – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Target operating temperatures


• Hydraulic design and circulation requirements


• Ambient environmental conditions


• System resilience planning


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider maximum usage scenarios and continuous duty patterns.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Beer and spirit production


• Food manufacturing plants


• Pharmaceutical production environments


• Laser and medical equipment cooling


• Manufacturing and moulding operations


• Refrigerated storage applications

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they prevent overheating during continuous machinery operation.

Maintenance and Long-Term Reliability

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Removing debris from heat rejection surfaces


• Verifying control panel settings


• Monitoring refrigerant pressures

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Frequently Asked Questions

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Is external installation possible?

Outdoor installation is possible when the system is designed for external conditions.

What makes glycol systems different?

Glycol systems use a glycol-water mixture to allow lower operating temperatures and prevent freezing.

Do modern control panels support remote monitoring?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

How often should glycol fluid be tested?

Annual testing is common, though high-demand systems may require more frequent checks.

Which industries benefit most from glycol chillers?

Food production, beverage processing, pharmaceuticals and precision engineering rely heavily on glycol cooling.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.